After configuring three-segment VXLAN to implement DCI, verify the configuration, such as EVPN instances and VXLAN tunnel information.
Prerequisites
Configurations of using three-segment VXLAN to implement DCI have been complete.
Procedure
- Run the display bridge-domain [ binding-info | [ bd-id [ brief | verbose | binding-info ] ] ] command to check BD configurations.
- Run the display interface nve [ nve-number | main ] command to check NVE interface information.
- Run the display bgp evpn peer [ [ ipv4-address ] verbose ] command to check BGP EVPN peer information.
- Run the display vxlan peer [ vni vni-id ] command to check ingress replication lists of a VNI or all VNIs.
- Run the display vxlan tunnel [ tunnel-id ] [ verbose ] command to check VXLAN tunnel information.
- Run the display vxlan vni [ vni-id [ verbose ] ] command to check VNI information.
- Run the display interface vbdif [ bd-id ] command to check VBDIF interface information and statistics.
- Run the display mac-limit bridge-domain bd-id command to check MAC address limiting configurations of a BD.
- Run the display bgp evpn all routing-table command to check EVPN route information.