Verifying the Route Attribute Set Configuration

After configuring route attribute sets, verify the configuration.

Route attribute sets have been configured.

Run the display xpl { as-path-list | community-list | ext-community-list rt | ext-community-list soo | ip-prefix-list | ipv6-prefix-list | route-filter | rd-list | route-flow-group | interface-list } [ name xpl-name attachpoints ] command to check the configurations of XPL route attribute sets or the detailed information referenced by routing protocols.
Run the display xpl { as-path-list | community-list | ext-community-list rt | ext-community-list soo | ip-prefix-list | ipv6-prefix-list | rd-list | route-filter | route-flow-group| route-flow-group | interface-list } state [ attached | unattached ] command to check information about XPL route attribute set configurations and references.

To check detailed XPL configurations, run the display current-configuration configuration xpl command.