TWAMP Applications on an IP Network
As shown in Figure 1, DeviceA, DeviceB, and DeviceC on an IP network function as the servers in a TWAMP test. DeviceE functions as the control-client and specifies an IP address to start collecting statistics. DeviceE sends statistics to the performance management system.
Users can compare statistics to measure the performance of network segments. For example, to measure the performance of the IP network between DeviceA and DeviceB, the control-client initiates a TWAMP test for DeviceA and DeviceB each. Users can check the statistics about the performance of the IP network between DeviceA and DeviceB by comparing the two sets of statistics.
