Failed to configure the switch time through iMaster NCE-Campus.
Parameters
Parameter Name
Parameter Meaning
ErrorCode
Indicates an error code.
Info
Indicates a reason.
Possible Causes
The switch time has been synchronized through NTP.
Procedure
Check whether the switch time needs to be configured on the iMaster NCE-Campus.
If not, no further action is required.
If so, go to step 2.
Run the ntp-service server disable command on the switch to disable the NTP time synchronization function, save the configuration, and power-cycle the switch to restart it. Then configure the switch time on the iMaster NCE-Campus.