ASMNG_1.3.6.1.4.1.2011.5.25.327.31.2.2.23 hwAsSlotOnlineFailNotify

Description

ASMNG/2/ASSLOTONLINEFAIL: OID [oid] AS board fails to go online. (AS Index=[INTEGER], AS Name=[STRING], Slot Model=[STRING], Slot ID=[INTEGER], Reason ID=[INTEGER], Description=[STRING])

When an AS is a stack, some member switches in the stack failed to go online.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.327.31.2.2.23	Major	processingErrorAlarm(4)

Parameters

Name	Meaning
oid	Indicates the MIB object ID of the alarm.
AS Index	Index of the AS.
AS Name	Name of the AS.
Slot Model	Device model of the AS.
Slot ID	Device ID of the switch that failed to go online.
Reason ID	ID of the online failure reason.
Description	Online failure reason: The downstream port is configured as a stack port.

Impact on the System

Some member switches in the stack cannot go online and restart repeatedly.

Possible Causes

When a stack functioned as an AS, the new member switch used downlink ports as stack member ports.

Procedure

If the new member switch in the stack cannot go online, disconnect it from the stack and then run the display stack port command to check whether the configured stack member ports are downlink ports. If so, go to step 2.
Change stack member ports from downlink ports to uplink ports.
1. Run the shutdown interface { interface-type interface-number1 [ to interface-type interface-number2 ] } &<1-10> command in the logical stack port view to disable stack member ports.
2. Run the undo port interface { interface-type interface-number1 [ to interface-type interface-number2 ] } &<1-10> enable command in the logical stack port view to remove stack member ports from the logical stack port.
3. Run the port interface { interface-type interface-number3 [ to interface-type interface-number4 ] } &<1-10> enable command in the logical stack port view to add uplink ports to the logical stack port.