ASMNG_1.3.6.1.4.1.2011.5.25.327.31.2.2.22 hwAsSysmacSwitchCfgErrNotify

Description

ASMNG/4/ASSYSMACSWITCHCFGERR: OID [oid] An error occurs in the configuration of AS system MAC switching delay. (AS Name=[STRING])

The MAC address switching mode of the AS stack system was not set to non-switching.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.327.31.2.2.22	Warning	processingErrorAlarm(4)

Parameters

Name	Meaning
oid	Indicates the MIB object ID of the alarm.
AS Name	Indicates the AS name.

Impact on the System

After an active/standby switchover is performed, users connecting to the original active AS go offline.

Possible Causes

The MAC address switching mode of the AS stack system was not set to non-switching. If the MAC address switching delay was set to 0, MAC address switching would not be performed.

Procedure

Check whether MAC address switching is required when an active/standby switchover is performed in the AS stack system.
- If so, the alarm handling ends.
- If not, go to step 2.
Run the stack timer mac-address switch-delay 0 command in the system view to set the value of the MAC address switching timer to 0.

Related Information

None.