CFM/4/FILELENGTH_NOTMATCH

Message

CFM/4/FILELENGTH_NOTMATCH:Failed to set the [object] because the size of the system file is inconsistent with that of the homonymous file on [slot-id].

Description

The configuration failed because the size of the system file was inconsistent with that of the existing file.

Parameters

Parameter Name	Parameter Meaning
[object]	Indicates the type of the file: Startup file PAF file Configuration file
[slot-id]	Indicates the name of a board.

Possible Causes

The configuration failed because the size of the system file was inconsistent with that of the existing file.

Procedure

Run the dir command to check whether the size of the system file specified in the startup command is consistent with that of the system file on the main control board.
- If the sizes of the system files are consistent, go to Step 3.
- If the sizes of the system files are inconsistent, go to Step 2.
Delete the system file specified in the startup command from the relevant board and upload the file again. Then run the startup command to set the system file to be loaded at the next startup and check whether the configuration succeeds.
- If the configuration succeeds, go to Step 4.
- If the configuration fails, go to Step 3.
Run the display diagnostic-information command and save the command output; Collect log information and configuration information, and then contact technical support personnel.
End.