CFM/5/FILE_NOTEXIST

Message

CFM/5/FILE_NOTEXIST: Failed to set the [object] because the system file does not exist on [slot-id].

Failed to set the system file to be loaded at the next startup of the cluster because the file did not exist.

Parameter Name	Parameter Meaning
[object]	Indicates the type of the file: Startup file PAF file Configuration file
[slot-id]	Indicates the name of a board.

The system file specified in the startup command did not exist on the relevant board.

Run the dir command to check whether the system file specified in the startup command exists on the relevant board.
- If the system file exists, go to Step 3.
- If the system file does not exist, go to Step 2.
Upload the relevant system file and then run the startup command again. Then, check whether the configuration succeeds.
- If the configuration succeeds, go to Step 4.
- If the configuration fails, go to Step 3.
Run the display diagnostic-information command and save the command output; Collect log information and configuration information, and then contact technical support personnel.
End.