< Home

DLDP_1.3.6.1.4.1.2011.5.25.173.3.4 hwDldpLoopResume

Description

DLDP/4/DETECTUNIDIRECT(t): OID [oid] The port is detected exit Loop status. (IfIndex=[integer], IfName=[STRING])

The loop on an interface has been removed or the interface is shut down.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.173.3.4 Warning equipmentAlarm(5)

Parameters

Name Meaning
[oid] Indicates the MIB object ID of the alarm.
IfIndex Indicates the index of the interface where the alarm is generated.
IfName Indicates the name of the interface where the alarm is generated.

Impact on the System

The loop on the interface has been removed.

  • If the fibers on the interface are connected correctly and the loop is removed, services on the interface are resumed.
  • If the interface is shut down, the interface cannot work.

Possible Causes

1:

The fibers on the interface are connected correctly and the loop is removed.

2:

The interface is shut down.

Procedure

  1. Run the display dldp command to check the DLDP status on the interface.

    • If the DLDP port state field displays advertisement, the loop has been removed. Go to 4.

    • If the DLDP port state field displays inactive, go to 2.

  2. Check whether the interface is in Down state.

    (1) If so, connect the fibers correctly. When the interface goes Up, go to 1.

    (2) If not, go to 3.

  3. Contact technical support personnel.
  4. End.
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic