IFPDT_1.3.6.1.4.1.2011.5.25.219.2.12.3 hwPortNoSupportOETrap

Description

IFPDT/4/NOSUPPORT_OEPORT:OID [oid] The 1000base-T optical/electrical module or optical module cannot be installed on the port when the port is used as a stack port. (EntityPhysicalIndex=[INTEGER], EntityIfIndex=[INTEGER], EntPhysicalName=[OCTET], hwEntityTrapFaultID=[INTEGER])

A copper module or GE optical module cannot be used on a stack port.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.219.2.12.3	Warning	environmentalAlarm(6)

Parameters

Name	Meaning
oid	Indicates the MIB object ID of the alarm.
EntityPhysicalIndex	Indicates the physical index.
EntityIfIndex	Indicates the interface index.
EntPhysicalName	Indicates the entity name. The entity name varies according to the card type.
hwEntityTrapFaultID	Indicates an error code.

Impact on the System

The copper module or GE optical module cannot be used on a stack port.

Possible Causes

The port has been configured as a stack port and cannot have any copper module or GE optical module installed.

Procedure

Replace the copper module or GE optical module.
If the stack port is not required, delete the stack port configuration to restore the port to a common service port. Then the copper module or GE optical module can be used on the port.
If the problem persists, contact technical support personnel.
End.