< Home

IFPDT_1.3.6.1.4.1.2011.5.25.315.3.7 hwTrunkMemSpeedDifferentAlarm

Description

IFPDT/3/MEMSPEEDDIF: OID [OID] The active member ports in trunk have inconsistent bandwidth. (TrunkIfIndex=[INTEGER], TrunkName=[OCTET])

The rates of active interfaces of the Eth-Trunk are different.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.315.3.7 Minor equipmentAlarm(5)

Parameters

Name Meaning

OID

Indicates the MIB object ID of the alarm.

TrunkIfIndex

Index of an Eth-Trunk.

TrunkName

Name of an Eth-Trunk.

Impact on the System

Packet loss may occur on the member interface with low bandwidth.

Possible Causes

The rates of active interfaces of the Eth-Trunk are different.

Procedure

  1. Run the display Eth-Trunk [ trunk-id ] command to check whether the value of WorkingMode is NORMAL.

    • If the value of WorkingMode is NORMAL, go to 2.

    • If the value of WorkingMode is not NORMAL, go to 3.

  2. Check whether member interfaces use the same type and rate.

    • For electrical interfaces, if rates are manually configured and different, reconfigure the rates. If rates are not configured manually, go to 3.

    • For optical interfaces, if rates are manually configured and different or optical modules use different types, reconfigure the rates or replace optical modules. If rates are not configured manually, go to 3.

  3. Contact technical support personnel.
  4. End.
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >