L3VPN/4/L3V_TRAP_MID_EXCEED:OID [oid] The number of routes in the VPN instance exceeded the middle threshold. (VpnInstanceName=[octet], VpnInstanceRouteCount=[gauge], MidThresholdValue=[gauge])
The number of routes contained by the specified VRF exceeds the value indicated by mplsL3VpnVrfMidRouteThreshold.
| Alarm ID | Alarm Severity | Alarm Type |
|---|---|---|
1.3.6.1.2.1.10.166.11.0.3 |
Warning |
qualityOfServiceAlarm(3) |
| Name | Meaning |
|---|---|
oid |
Indicates the MIB object ID of the alarm. |
VpnInstanceName |
Indicates the name of a VPN instance. |
VpnInstanceRouteCount |
Indicates the number of existing routes or prefixes. |
MidThresholdValue |
Indicates that the alarm threshold of routes or prefixes. |
When the total number of VPN routes or prefixes exceeds the alarm threshold, routes can still be installed to the routing table. That is, the routes are not discarded and traffic is not interrupted for the moment.
1. The total number of the VPN routes in the VPN routing table exceeds the alarm threshold of VPN routes specified in the routing-table limit command, and is smaller than the maximum number of routes.
2. The total number of the VPN route prefixes in the VPN routing table exceeds the alarm threshold of VPN route prefixes specified in the prefix limit command, and is smaller than the maximum number of route prefixes.
If so, go to Step 4.
If not, go to Step 3.
If so, go to Step 5.
If not, go to Step 6.
If so, go to Step 5.
If not, run the routing-table limit number { alert-percent | simply-alert } or prefix limit number { alert-percent | simply-alert } command to set a proper alarm threshold of routes or prefixes. Then, go to Step 6.