L3VPN/2/L3V_TRAP_THRE_EXCEED:OID [oid] The number of routes in the VPN instance exceeded the maximum value. (VpnInstanceName=[octet], VPNInstanceRouteCount=[gauge], MaxValue=[gauge])
The number of routes contained by the specified VRF exceeds or attempts to exceed the maximum allowed value as indicated by mplsVrfMaxRouteThreshold.
| Alarm ID | Alarm Severity | Alarm Type |
|---|---|---|
1.3.6.1.2.1.10.166.11.0.4 |
Major |
qualityOfServiceAlarm(3) |
| Name | Meaning |
|---|---|
oid |
Indicates the MIB object ID of the alarm. |
VpnInstanceName |
Indicates the name of the VPN instance. |
VPNInstanceRouteCount |
Indicates the number of current routes. |
MaxValue |
Indicates that the maximum value of routes or prefixes. |
The number of private routes or prefixes exceeds the maximum value, and no routes or prefixes can be added. As a result, routes will be discarded and some traffic cannot be forwarded.
1. The total number of the VPN routes in the VPN routing table exceeded the upper limit specified in the License or exceeded the maximum value specified in the routing-table limit command.
2. The total number of the VPN route prefixes in the VPN routing table exceeded the upper limit specified in the License or exceeded the maximum value specified in the prefix limit command.
If so, go to Step 4.
If not, go to Step 3.
If so, go to Step 5.
If not, go to Step 6.
If so, go to Step 5.
If not, run the routing-table limit number { alert-percent | simply-alert } command or the prefix limit number { alert-percent | simply-alert } command to set a proper maximum value of routes or prefixes. Then, go to Step 6.