MGMD_1.3.6.1.4.1.2011.5.25.149.3.3.12 hwMgmdTotalLimitThresholdExceed

Description

MGMD/3/hwMgmdTotalLimitThresholdExceed:OID [oid] IGMP or MLD total entries count in all instances reached the upper threshold. (hwMgmdNotificationAddressType=[integer], hwMgmdTotalLimitCurrentCount=[integer], hwMgmdTotalLimitThreshold=[integer]%, hwMgmdTotalEntries=[integer])

The proportion of global IGMP/MLD entries created to the maximum global IGMP/MLD entries allowed reached the upper alarm threshold.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.149.3.3.12	Minor	communicationsAlarm

Parameters

Name	Meaning
oid	Indicates the MIB object ID of the alarm.
hwMgmdNotificationAddressType	Group address type: 1: IPv4 address (IGMP) 2: IPv6 address (MLD)
hwMgmdTotalLimitCurrentCount	Number of global IGMP/MLD entries created
hwMgmdTotalLimitThreshold	Alarm threshold for global IGMP/MLD entries
hwMgmdTotalEntries	Maximum number of global IGMP/MLD entries allowed

Impact on the System

If you continue to configure multicast services after this alarm is reported, new multicast services may fail to be provisioned due to the lack of IGMP/MLD entry resources.

Possible Causes

The proportion of global IGMP/MLD entries created to the maximum global IGMP/MLD entries allowed reached the upper alarm threshold.

Procedure

Check whether the upper alarm threshold is too low in the configuration file.
- If the threshold is too low, go to Step 2.
- If the threshold is not low, go to Step 3.
Run the mgmd total-number threshold-alarm upper-limit upper-limit-value lower-limit lower-limit-value command in the multicast MIB view to set the upper alarm threshold to a larger value.
Confirm whether network expansion is required. If network expansion is required, contact technical support personnel.
End.

Related Information

None