MPLS/4/ADD_LSPTBL_FAIL: Add lsp table failed because
of insufficient resource. (Label=[ULONG])
Description
An LSP entry failed to be added because resources are
insufficient.
Parameters
Parameter Name
Parameter Meaning
Label
Indicates the MPLS label value.
Possible Causes
The number of LSPs has reached the limit of the device.
Procedure
Run the display mpls lsp statistics and display mpls l2vpn resource commands to check services that consume many resources.
Run the display current-configuration command to check detailed device configuration. Delete
MPLS services that are not required, such as LDP LSP, MPLS TE, VPLS,
VLL, and L3VPN.
Run the display mpls lsp statistics and display mpls l2vpn resource commands to check whether there are available resources. If
so, the problem is rectified. If the problem is not rectified, go
to step 4.
Collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.