MPLS/4/RPC_CALL_FAIL

Message

MPLS/4/RPC_CALL_FAIL: RPC Call failed. (Service=[STRING], SlotId=[ULONG], ErrorCode=[ULONG])

The MPLS module failed to invoke a remote procedure call (RPC).

Parameter Name	Parameter Meaning
Service	Indicates the RPC invoking module.
SlotId	Indicates the slot ID.
Error Code	Indicates the error code.

The RPC module failed to send messages.

Run the display device command to check whether the member switch has registered.
- If so, go to step 3.
- If not, go to step 2.
If the member switch has not registered, RPC communication fails, which is normal. This log is informational only, and no action is required.
Collect log information and configuration information, and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.