MPLS/4/L2VPN_ADD_VPTBL: Add source_vp table failed
when create forwarding entry for l2vpn [ULONG].
Description
The device failed to deliver the VP index. The VP index
is allocated by the software to control L2VPN resources.
Parameters
Parameter Name
Parameter Meaning
ULONG
Indicates the VP index.
Possible Causes
The number of VP indexes exceeds the maximum number
of VPs supported by the card.
Procedure
Run the display mpls l2vpn resource commands to check L2VPN services that consume many resources.
Run the display current-configuration command to check detailed device configuration. Delete
unnecessary L2VPN services.
Run the display mpls l2vpn resource command to check there are available resources. If so,
the problem is rectified.
When many VSIs are configured on the device and a large
number of interfaces are added to the VLANs bound to the VSIs, VP
index resources may be insufficient. Remove unnecessary interfaces
from the VLAN bound to a VSI. If the problem persists, go to step
5.
Collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.