OSPFV3_1.3.6.1.4.1.2011.5.25.147.0.14 hwOspfv3AuthSequenceNumWrap

Description

OSPFV3/2/AUTHSEQUENCENUMWRAP:OID [oid] The cryptographic sequence number has wrapped. (RouterId=[gauge], IfName=[octet])

The higher order and lower order values of the 64-bit sequence number were misplaced.

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.147.0.14	Major	processingErrorAlarm(4)

Name	Meaning
oid	Indicates the MIB object ID of the alarm.
RouterId	Local router ID with its value as a decimal integer
IfName	Interface name

The device is open to potential attacks.

The device has been running for a long time.

Run the display ospfv3 interface command to view the sequence number of the sent packet by checking Higher Order Sequence Number and Lower Order Sequence Number and run the display ospfv3 peer command to view the sequence number of the received packet by checking Received Higher Order Sequence Number and Received Lower Order Sequence Number. Then, check whether the sequence numbers of the sent and received packets are the same.
Collect alarm information and configuration information, and then contact technical support personnel.
End.

None