POE_1.3.6.1.4.1.2011.5.25.195.40.11 hwPoePdClassOvercurrent

Description

POE/4/PDCLASSOVERCURRENT: OID [oid] has detected a classfication overcurrent PD and power denied. (IfIndex=[INTEGER], Interface="[OCTET]")

The system detects that overcurrent occurs during PD classification.

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.195.40.11	Warning	communicationsAlarm(2)

Name	Meaning
oid	Indicates the MIB object ID of the alarm.
IfIndex	Indicates the interface index.
Interface	Indicates the interface name.

Services are not affected.

The PD does not comply with standards.

Run the poe high-inrush enable slot slot-id command in the system view to allow high inrush current during power-on and then check whether the alarm is cleared.
If so, the alarm handling ends.

If not, go to step 2.
Replace the PD with a standard PD and then check whether the alarm is cleared.
If so, the alarm handling ends.

If not, collect alarm information and configuration information, and then contact technical support personnel.

None