RRPP_1.3.6.1.4.1.2011.5.25.113.4.2 hwRrppRingFail

Description

RRPP/2/RNGDN:OID [oid] Domain [domain-id] ring [ring-id] is failed.

A link on the ring network was faulty.

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.113.4.2	Major	equipmentAlarm(5)

Name	Meaning
oid	Indicates the MIB object ID of the alarm.
domain-id	Indicates the ID of an RRPP domain.
ring-id	Indicates the ID of an RRPP ring.

Data flows will be interrupted in milliseconds when the link is switched.

The complete ring became incomplete because a link was faulty on the ring.

Run the display rrpp verbose domain domain-id command to check whether the status of each interface is unknown.
- If so, go to Step 3.
- If not, go to Step 2.
Run the display rrpp verbose domain domain-id command to check whether the status of each interface is Down.
- If so, go to Step 5.
- If not, go to Step 9.
Check whether the interface board corresponding to the port is pulled out.
- If so, go to Step 7.
- If not, go to Step 2.
Run the display this command on the interface to check whether the interface is shut down.
- If so, go to Step 5.
- If not, go to Step 6.
Run the undo shutdown command in the interface view to check whether the alarm is cleared.
- If so, go to Step 10.
- If not, go to Step 6.
Check whether devices or links between devices are faulty.
- If so, go to Step 8.
- If not, go to Step 9.
Insert the board correctly and then check whether the alarm is cleared.
- If so, go to Step 10.
- If not, go to Step 2.
Repair devices or links between devices and then check whether the alarm is cleared.
- If so, go to Step 10.
- If not, go to Step 9.
Collect alarm information and configuration information, and then contact technical support personnel.
End.