SEA/3/SIP_ACL_FAIL: Failed to add rule, because RPC failed on slot [ULONG].
Description
An ACL rule failed to be delivered due to an RPC communication failure.
Parameters
Parameter Name
Parameter Meaning
[ULONG]
Indicates the slot ID.
Possible Causes
When the ACL module sends messages, RPC communication fails.
Procedure
Run the display device command to check whether the member switch has registered.
If so, go to step 3.
If not, go to step 2.
If the member switch has not registered, RPC communication fails, which is normal. This log is informational only, and no action is required.
Collect log information about RPC message sending failures related to this member switch, and contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.