SEA/3/SIP_ACL_FAIL: Failed to add rule, because ACL resources are insufficient on slot [ULONG].
Description
The switch failed to deliver an ACL rule corresponding to the SEA function because ACL resources were insufficient.
Parameters
Parameter Name
Parameter Meaning
[ULONG]
Indicates the slot ID.
Possible Causes
When the SEA function is enabled, ACL resources are insufficient.
Procedure
Run the display acl resource [ slotslot ] command to view information about ACL resources, including ACL4 and ACL6
resources.
Run the display current-configuration command to check the current configuration on the switch.
Check the services that occupy ACL resources based on ACL resource information and the current configuration as follows, and delete unnecessary services to release ACL resources.
Check whether NAC, IPSG, MQC, and ACL-based simplified traffic policy services that occupy a large amount of ACL resources exist on the switch.
Check the services that occupy ACL resources based on fields in the ACL resource information. For example, MQC, ACL-based simplified traffic policy, SVF, MPLS, and BFD for VPLS services occupy UDF
ACL resources. If a large amount of UDF ACL resources are occupied, check these services first.
If the fault persists, collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.