SECE/3/MFF_RESOURCE_LACK

Message

SECE/3/MFF_RESOURCE_LACK: Resource for MFF in slot [STRING] is not enough. (Vlan=[ULONG])

The ACL resources corresponding to MFF are insufficient, so delivery of ACL resources fails.

Parameter Name	Parameter Meaning
slot	The value is the slot ID if stacking is not configured. The value is the stack ID when stacking is configured.
Vlan	Specifies a VLAN ID.

When MFF is enabled in the VLAN view, if the ACL resources are insufficient, the device will generate this log.

Run the display acl resource [ slot slot ] command to view information about ACL resources, including ACL4 and ACL6 resources.
Run the display current-configuration command to check the current configuration on the switch.
Check the services that occupy ACL resources based on ACL resource information and the current configuration as follows, and delete unnecessary services to release ACL resources.
- Check whether NAC, IPSG, MQC, and ACL-based simplified traffic policy services that occupy a large amount of ACL resources exist on the switch.
- Check the services that occupy ACL resources based on fields in the ACL resource information. For example, MQC, ACL-based simplified traffic policy, SVF, MPLS, and BFD for VPLS services occupy UDF ACL resources. If a large amount of UDF ACL resources are occupied, check these services first.
If the fault persists, collect log information and configuration information, and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.