SECE/3/RESOURCE_INSUFFIEIENT

Message

SECE/3/RESOURCE_INSUFFIEIENT: Resource for [STRING1] in slot [STRING2] is insufficient.

Description

Attack source tracing, CAR, whitelist configuration, blacklist configuration, IP Source Trail, storm control, traffic-pppoe, deception, or traffic suppression in VLANs fails due to insufficient resources.

Parameters

Parameter Name	Parameter Meaning
STRING1	Indicates the operation type.
STRING2	Indicates the slot id.

Possible Causes

Attack source tracing, CAR, whitelist configuration, blacklist configuration, IP Source Trail, storm control, traffic-pppoe, deception, or suppression on broadcast, unknown multicast, or unknown unicast packets in VLANs fails.

Procedure

Run the display acl resource [ slot slot ] command to view information about ACL resources, including ACL4 and ACL6 resources.
Run the display current-configuration command to check the current configuration on the switch.
Check the services that occupy ACL resources based on ACL resource information and the current configuration as follows, and delete unnecessary services to release ACL resources.
- Check whether NAC, IPSG, MQC, and ACL-based simplified traffic policy services that occupy a large amount of ACL resources exist on the switch.
- Check the services that occupy ACL resources based on fields in the ACL resource information. For example, MQC, ACL-based simplified traffic policy, SVF, MPLS, and BFD for VPLS services occupy UDF ACL resources. If a large amount of UDF ACL resources are occupied, check these services first.
If the fault persists, collect log information and configuration information, and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.