SEP/5/SEP_SET_PORT_FORWARD

Message

SEP/5/SEP_SET_PORT_FORWARD:The port has been set to the forwarding state. (SegmentID=[ULONG], InterfaceName=[STRING], Reason=[STRING])

An SEP ring port entered the Forwarding state.

Parameter Name	Parameter Meaning
SegmentID	ID of the SEP segment
InterfaceName	Name of the interface added to the SEP segment
Reason	Reason why the port entered the Forwarding state: SEP port disable: The port was removed from an SEP segment. SEP port priority change: The SEP port priority changed. SEP brother port's LSA information change: The LSA information of the port's brother port changed. SEP port received discarding port's LSA information: The port received LSA information of a blocked port in the SEP segment.

SEP port disable: The port was removed from an SEP segment.
SEP port priority change: The SEP port priority changed.
SEP brother port's LSA information change: The LSA information of the port's brother port changed.
SEP port received discarding port's LSA information: The port received LSA information of a blocked port in the SEP segment.

Check physical devices on the network to see whether a new SEP-enabled physical link is added.
- If a new physical link has been added, go to Step 2.
- If no new physical link has been added, go to Step 3.
Check whether the added physical link is needed.
- If the added physical link is needed, this trap message is informational only, and no action is required.
- If the added physical link is not needed, go to Step 4.
Check whether any port added to the SEP segment goes Up or Down.
- If a port added to the SEP segment has gone Up or Down, this trap message is informational only, and no action is required.
- If no port added to the SEP segment has gone Up or Down, go to Step 4.
Collect trap, log, and configuration information, and contact technical support personnel.