SEP/5/SEP_SET_PORT_DISCARD

Message

SEP/5/SEP_SET_PORT_DISCARD:The port has been set to the discarding state. (SegmentID=[ULONG], InterfaceName=[STRING], Reason=[STRING])

An SEP ring port entered the Discarding state.

Parameter Name	Parameter Meaning
SegmentID	ID of the SEP segment
InterfaceName	Name of the interface added to the SEP segment
Reason	Reason why the port entered the Discarding state: SEP port enable: The port was added to an SEP segment. SEP port priority change: The SEP port priority changed. SEP port link-up: The port went Up. SEP port link-down: The port went Down. SEP port hello fail timer expired: The Hello Fail Timer timed out on the port. SEP port received neighbour packet: The port received a neighbor Down or Up packet. SEP brother port's LSA information change: The LSA information of the port's brother port changed. SEP neighbour port disable: The port's neighbor port left the SEP segment. SEP loop detected: No blocked port was detected in the SEP segment. SEP port preempt: The port was preempted.

SEP port enable: The port was added to an SEP segment.
SEP port priority change: The SEP port priority changed.
SEP port link-up: The port went Up.
SEP port link-down: The port went Down.
SEP port hello fail timer expired: The Hello Fail Timer timed out on the port.
SEP port received neighbour packet: The port received a neighbor Down or Up packet.
SEP brother port's LSA information change: The LSA information of the port's brother port changed.
SEP neighbour port disable: The port's neighbor port left the SEP segment.
SEP loop detected: No blocked port was detected in the SEP segment.
SEP port preempt: The port was preempted.

Check physical devices on the network to see whether a new SEP-enabled physical link is added.
- If a new physical link has been added, go to Step 2.
- If no new physical link has been added, go to Step 3.
Check whether the added physical link is needed.
- If the added physical link is needed, this trap message is informational only, and no action is required.
- If the added physical link is not needed, go to Step 4.
Check whether any port added to the SEP segment goes Up or Down.
- If a port added to the SEP segment has gone Up or Down, this trap message is informational only, and no action is required.
- If no port added to the SEP segment has gone Up or Down, go to Step 4.
Collect trap, log, and configuration information, and contact technical support personnel.