SRM/3/RXPOWER_EXCEEDMINOR:Optical module in interface [STRING] exception, Rx power is too low.
Description
The receive power of an optical module is too low.
Parameters
Parameter Name
Parameter Meaning
STRING
Indicates an interface name.
Possible Causes
The receive optical power of the optical module is below the lower threshold.
Procedure
Run the display transceiver command to check whether the receive power (RX Power) of the optical module is below the lower threshold (RX Power Low Threshold).
If so, go to step 2.
If not, go to step 3.
Check whether the receive power lower threshold of the optical module is within the acceptable range.
If so, run the transceiver diagnosis threshold rx-power command to change the receive power lower threshold of the optical module.
If not, go to step 3.
Collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.