SW_SNPG/3/ACL_NO_RESOURCE

Message

SW_SNPG/3/ACL_NO_RESOURCE:ACL resources are insufficient.

There are not enough ACL resources for data filtering.

Parameter Name	Parameter Meaning
None	None

Multicast data filtering failed because of insufficiency of ACL resources.

Run the display acl resource [ slot slot ] command to view information about ACL resources, including ACL4 and ACL6 resources.
Run the display current-configuration command to check the current configuration on the switch.
Check the services that occupy ACL resources based on ACL resource information and the current configuration as follows, and delete unnecessary services to release ACL resources.
- Check whether NAC, IPSG, MQC, and ACL-based simplified traffic policy services that occupy a large amount of ACL resources exist on the switch.
- Check the services that occupy ACL resources based on fields in the ACL resource information. For example, MQC, ACL-based simplified traffic policy, SVF, MPLS, and BFD for VPLS services occupy UDF ACL resources. If a large amount of UDF ACL resources are occupied, check these services first.
If the fault persists, collect log information and configuration information, and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.