VCMP_1.3.6.1.4.1.2011.5.25.42.3.1.4.3 hwVcmpRevisionConflict

Description

VCMP/4/VCMP_COLLISION_REVISION: OID [oid] A server received a VCMP packet with a higher revision number. (VcmpDeviceMac=[OPAQUE])

After a VCMP client sent the VCMP server a VCMP request packet due to a restart or a configuration change, the 16 left-most bits in the configuration revision number in a received VCMP packet are the same as that of the local revision number, and the 16 right-most bits are greater than the local ones.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.42.3.1.4.3	Warning	other(1)

Parameters

Name	Meaning
oid	Indicates the MIB object ID of the alarm.
VcmpDeviceMac	MAC address of a conflicting server.

Impact on the System

After this trap is displayed, VLAN information on the VCMP server cannot be sent to VCMP clients in the same VCMP domain.

Possible Causes

VLAN information was missing on the VCMP server.

Procedure

Run the display current-configuration command on each VCMP client and theVCMP server to obtain the configurations that take effect. Compare the configurations on the VCMP clients with those on the VCMP server and check whether VLAN information is missing on the VCMP server.
- If VLAN information is missing on the VCMP server, go to 2.
- If no VLAN information is missing on the VCMP server, go to 3.
Reconfigure the VLAN on the VCMP server. Then check whether the trap is cleared.
- If the trap is cleared, go to 4.
- If the trap persists, go to 3.
Collect the alarm, log, and configuration information, and then contact technical support personnel.
End.

Related Information

None