WLAN_1.3.6.1.4.1.2011.6.139.13.1.1.68 hwApPoePowerOverUtilizationThresholdTrap

Description

WLAN/4/AP_POE_POWER_OVER_UTILIZATION_THRESHOLD:OID [oid] The power load of a PoE card exceeds the upper limit. (APMAC=[OPAQUE], APName=[STRING], ApIfIndex=[INTEGER], ApEntityPhysicalName=[OCTET], ApPoeCurConsumPower=[INTEGER], ApPoeConsumPowerThreshold=[INTEGER], APID=[INTEGER])

The total PoE power consumption of an AP is greater than or equal to the alarm threshold.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.6.139.13.1.1.68	Warning	equipmentAlarm(5)

Parameters

Name	Meaning
OID	Indicates the ID of the MIB object.
APMAC	Indicates the AP's MAC address.
APName	Indicates the AP name.
ApIfIndex	Indicates the AP interface index.
ApEntityPhysicalName	Indicates the AP interface name.
ApPoeCurConsumPower	Indicates the current consumed power.
ApPoeConsumPowerThreshold	Indicates the power threshold.
APID	Indicates the AP ID.

Impact on the System

If the alarm persists, all the PDs may be powered off because of insufficient power supply.

Possible Causes

The total power consumption of all the PDs is greater than or equal to the alarm threshold.

Procedure

Plan the network according to the system power supply. Increase priorities of important PDs to prevent their power from being preempted. If the alarm persists, power off some PDs to ensure system reliability.

Related Information

WLAN_1.3.6.1.4.1.2011.6.139.13.1.1.69 hwApPoePowerOverUtilizationThresholdRestoreTrap