WLAN_1.3.6.1.4.1.2011.6.139.13.1.1.67 hwApPoePdPriorityDifferentTrap

Description

WLAN/4/AP_POE_PD_PRIORITY_DIFFERENT:OID [oid] The port priority is different from the PD priority. (APMAC=[OPAQUE], APName=[STRING], ApIfIndex=[INTEGER], ApEntityPhysicalName=[OCTET], ApPoePdPriority=[INTEGER], ApPoePortPriority=[INTEGER], APID=[INTEGER])

The priority of an AP's interface that supports PoE out is different from the priority of the PD connected to this interface.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.6.139.13.1.1.67	Warning	qualityOfServiceAlarm(3)

Parameters

Name	Meaning
OID	Indicates the ID of the MIB object.
APMAC	Indicates the AP's MAC address.
APName	Indicates the AP name.
ApIfIndex	Indicates the AP interface index.
ApEntityPhysicalName	Indicates the AP interface name.
ApPoePdPriority	Indicates the PD priority.
ApPoePortPriority	Indicates the interface priority.
APID	Indicates the AP ID.

Impact on the System

Services are not affected.

Possible Causes

The interface priority is low, whereas the PD priority is high.

Procedure

Run the poe priority command in the AP wired port link profile view to change the interface priority to be higher than the PD priority. Then, check whether the alarm persists.
- If so, go to step 2.
- If not, go to step 3.
Collect alarm, log, and configuration information, and contact technical support personnel.
End.

Related Information

None