ac-list (AP provisioning view)

Function

The ac-list command configures an AC IPv4 address list for APs.

The undo ac-list command disables the AC from delivering this parameter setting to APs after the configuration is delivered using the commit command.

By default, no AC IPv4 address list is configured.

Format

ac-list ipv4-address &<1-4>

undo ac-list

Parameters

Parameter	Description	Value
ipv4-address	Specifies the IPv4 address of an AC.	The value is in dotted decimal notation.

Views

AP provisioning view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can run this command to configure an AC IPv4 address list for APs. After this list is configured, the APs can unicast a Discovery Request packet to discover an AC when they go online using IPv4 addresses.

Follow-up Procedure

Run the commit command to deliver configuration to APs and restart the APs to make the configuration take effect.

Example

# Set the AC's IPv4 address to 192.168.10.1 in the AP provisioning view.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] provision-ap
[HUAWEI-wlan-provision-ap] ac-list 192.168.10.1