alarm-restriction disable

Function

The alarm-restriction disable command disables alarm suppression for an AP.

The undo alarm-restriction disable command enables alarm suppression for an AP.

By default, alarm suppression is enabled for an AP.

Format

alarm-restriction disable

undo alarm-restriction disable

Parameters

None

Views

AP system profile view

Default Level

2: Configuration level

Usage Guidelines

If a STA cannot go online due to security type mismatch, UAC, or access user upper limit exceeding, the STA will automatically re-connect to the AP. During this period, the AP sends a large number of the same STA association failure alarms to the AC, which degrades the system performance.

To solve this problem, enable alarm suppression for the AP. The AP then does not report alarms repeatedly in the alarm suppression period, preventing alarm storms.

Example

# Disable alarm suppression for an AP.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap-system-profile name ap-system1
[HUAWEI-wlan-ap-system-prof-ap-system1] alarm-restriction disable