antenna-output

Function

The antenna-output command configures an output mode of a 2.4G/5G antenna.

The undo antenna-output command restores the default output mode of a 2.4G/5G antenna.

By default, a 2.4G/5G antenna uses split output.

Format

antenna-output { split | combine }

undo antenna-output

Parameters

Parameter	Description	Value
split	Indicates the split mode of a 2.4G/5G antenna.	-
combine	Indicates the combination mode of a 2.4G/5G antenna.	-

Views

AP system profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

In train-ground communication scenarios, you can use the antenna-output split command to configure the split mode of a 2.4G/5G antenna. The antenna uses either the 2.4 GHz radio to provide wireless coverage in the carriage, or the 5 GHz radio to provide wireless bridging between carriages.

In train-ground communication scenarios, you can use the antenna-output combine command to configure the combination mode of a 2.4G/5G antenna. The antenna uses the 2.4 GHz and 5 GHz radios to simultaneously provide wireless bridging between carriages.

Precautions

This command is supported only by APs supporting antenna combination and split modes.

Example

# Configure the combination mode of a 2.4G/5G antenna.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap-system-profile name apsys1
[HUAWEI-wlan-ap-system-prof-apsys1] antenna-output combine