client-mode enable

Function

The client-mode enable command enables the Mesh client mode.

The undo client-mode enable command disables the Mesh client mode.

By default, the Mesh client mode is disabled.

client-mode enable

undo client-mode enable

None

Mesh profile view

2: Configuration level

Usage Scenario

If the Mesh client is enabled for vehicle-mounted APs, trackside APs must also have the Mesh client enabled to set up a Mesh link.

Precautions

You cannot configure the Mesh client mode and bind the Mesh profile to a Mesh handover profile at the same time.

# Enable the Mesh client mode for Mesh profile test.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] mesh-profile name test
[HUAWEI-wlan-mesh-prof-test] client-mode enable