anti-interference disable

Function

The anti-interference disable command disables the anti-interference algorithm.

The undo anti-interference disable command enables the anti-interference algorithm.

By default, the anti-interference algorithm is enabled.

Format

anti-interference disable

undo anti-interference disable

Parameters

None

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

In high-density scenarios, the device supports the anti-interference algorithm to improve the overall throughput in the environment.

Precautions

The anti-interference algorithm may cause signal deterioration or flapping. As a result, new STAs far from the AP may encounter difficulties in accessing the network.

Example

# Disable the anti-interference algorithm.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] anti-interference disable
Warning: The per-packet-TPC function will become invalid when anti-interference function is disable. Continue? [Y/N]y