anti-interference per-packet-tpc disable

Function

The anti-interference per-packet-tpc disable command disables the per-packet power adjustment function.

The undo anti-interference per-packet-tpc disable command enables the per-packet power adjustment function.

By default, per-packet power adjustment is enabled.

Format

anti-interference per-packet-tpc disable

undo anti-interference per-packet-tpc disable

Parameters

None

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

In high-density scenarios, the per-packet power adjustment function can properly control the transmit power of radios in an area, which reduces interference to neighboring devices while meeting wireless communication requirements.

Prerequisites

The anti-interference algorithm has been enabled.

Precautions

The anti-interference algorithm may cause signal deterioration or flapping. As a result, new STAs far from the AP may encounter difficulties in accessing the network.

Example

# Disable the per-packet power adjustment function.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] anti-interference per-packet-tpc disable