ap-group (AP view)

Function

The ap-group command configures an AP group.

The undo ap-group command restores the default AP group.

By default, no AP group is configured.

Format

ap-group ap-group

undo ap-group

Parameters

Parameter	Description	Value
ap-group	Specifies an AP group.	The AP group must exist.

Views

AP view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

If you need to perform the same configuration on multiple APs, add the APs to an AP group and perform the configuration in the AP group. The configuration takes effect on all APs of the group. This prevents you from configuring each AP one by one.

Each AP must be added to an AP group. If no AP group is configured for an AP, the AP automatically joins the AP group default.

Example

# Configure the AP group ap-new-group for an AP.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ap-id 0
[HUAWEI-wlan-ap-0] ap-group ap-new-group
Warning: This operation may cause AP reset. If the country code changes, it will clear channel, power and antenna gain configuration s of the radio, Whether to continue? [Y/N]:y