ap-group all vap-profile

Function

The ap-group all vap-profile command binds a VAP profile to all AP groups.

The undo ap-group all vap-profile command unbinds a VAP profile from all AP groups.

By default, no VAP profile is bound to radios of an AP group.

Format

ap-group all vap-profile profile-name wlan wlan-id radio { radio-id | all }

undo ap-group all vap-profile wlan wlan-id radio { radio-id | all }

Parameters

Parameter	Description	Value
profile-name	Specifies the name of a VAP profile.	The value must be the name of an existing VAP profile.
wlan wlan-id	Specifies a VAP ID.	The value is an integer that ranges from 1 to 16. NOTE: The WLAN ID for the WDS service can be 13 or 14. The WLAN ID for the Mesh service is 16. The WLAN ID for the offline management VAP configuration is 15 or an integer that ranges from 1 to 12. For the AP2030DN, each radio supports a maximum of eight VAPs. If the value of wlan-id exceeds 8, the configuration cannot take effect and the AP cannot generate wireless signals.
radio radio-id	Specifies a radio ID.	The value is an integer that ranges from 0 to 2. Three radios are available only on the AirEngine 8760-X1-PRO, AirEngine 8760R-X1E, AirEngine 6760-X1, AirEngine 6760-X1E, AirEngine 5760-51, AP4030TN, AP4051TN, AP8050TN-HD.
radio all	Specifies all radios.	-

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

You can run the ap-group all vap-profile command to bind a VAP profile to all AP groups.

Example

# Bind the VAP profile office01 to all AP groups.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ap-group all vap-profile office01 wlan 1 radio 0
Info: This operation may take a few seconds, please wait.......done.
Warning: This operation is to bind the profile to 4 AP groups. Success count: 3. Failure count: 1. The failure causes are as follows:
-----------------------------------------------------------------------------------------------------------------------
AP group                             Config fail reason
-----------------------------------------------------------------------------------------------------------------------
default                              The WLAN ID on the radio is in use. Please use an unassigned WLAN ID.
-----------------------------------------------------------------------------------------------------------------------

**Table 1** Description of the **ap-group all vap-profile** command output
Item	Description
AP group	AP group to which the VAP profile fails to be bound.
Config fail reason	Binding failure cause.