as access controller ip-address

Function

The as access controller ip-address command specifies an IP address for an authentication control device on an authentication access device.

The undo as access controller ip-address command deletes the IP address specified for an authentication control device from an authentication access device.

By default, no IP address is specified for an authentication control device on an authentication access device.

Format

as access controller ip-address ip-address

undo as access controller ip-address

Parameters

Parameter	Description	Value
ip-address	Specifies an IP address for an authentication control device.	The value is in dotted decimal notation.

Views

System view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

When the policy association solution is deployed, authentication access devices and authentication control devices establish connections through CAPWAP tunnels. When an authentication access device dynamically obtains an IP address through the DHCP server, Option 43 is used to notify the authentication access device of the IP address for the authentication control device with which the authentication access device establishes a CAPWAP tunnel. When an IP address is statically configured for an authentication access device, the as access controller ip-address ip-address command is used to specify the IP address for the authentication control device with which the authentication access device establishes a CAPWAP tunnel.

Precautions

This command is supported only on authentication access devices.

Example

# Specify an IP address for an authentication control device.

<HUAWEI> system-view
[HUAWEI] as access controller ip-address 10.1.1.1