The authentication access-point max-user command sets the maximum number of access users allowed on an interface of an authentication access device.
The undo authentication access-point max-user command restores the default setting.
By default, an authentication access device does not limit the maximum number of users who are allowed to log in through its interfaces.
authentication access-point max-user max-user-number
undo authentication access-point max-user
Parameter |
Description |
Value |
---|---|---|
max-user-number |
Specifies the maximum number of access users allowed on an interface of an authentication access device. |
The value is an integer that ranges from 1 to 512 for S5720-EI, S6720-EI, and S6720S-EI, from 1 to 1000 for S5731-S and S5731S-S, from 1 to 1024 for S5731-H, S6730-H, S6730S-H, S5731S-H, S5732-H, S6730-S, S6730S-S, and S5730-HI, and from 1 to 300 for other models. |
Ethernet interface view, MultiGE interface view, 40GE interface view, GE interface view, XGE interface view, 25GE interface view, port group view
Usage Scenario
To limit the maximum number of access users allowed on an interface of an authentication access device, run the authentication access-point max-user command.
Precautions
This command is supported only on authentication access devices.
This command takes effect only for users who attempt to log in for the first time.
The interface types vary according to device models.