The authentication trigger-condition dhcp dhcp-option command enables the device to send DHCP option information to the authentication server when triggering MAC address authentication through DHCP packets.
The undo authentication trigger-condition dhcp dhcp-option command restores the default configuration.
By default, the device does not send DHCP option information to the authentication server when triggering MAC address authentication through DHCP packets.
authentication trigger-condition dhcp dhcp-option option-code
undo authentication trigger-condition dhcp dhcp-option option-code
| Parameter | Description | Value |
|---|---|---|
| option-code | Specifies the option that the device sends to the authentication server. |
The value is fixed as 82. |
System view, Ethernet interface view, GE interface view, XGE interface view, 40GE interface view, Eth-Trunk interface view, Port group view
This command is available to aid upgrade compatibility. It can only be run during the configuration restoration phase of the upgrade.
After the upgrade, this command is no longer supported, and it is replaced by the authentication trigger-condition dhcp dhcp-option option-code command in the mac access profile view.