authentication trigger-condition (802.1X authentication) (upgrade-compatible command)

Function

The authentication trigger-condition command configures the packet types that can trigger 802.1X authentication.

The undo authentication trigger-condition command restores the default configuration.

By default, DHCP/ARP packets can trigger 802.1X authentication.

Format

authentication trigger-condition { dhcp | arp } ^*

undo authentication trigger-condition [ dhcp | arp ] ^*

Parameters

Parameter	Description	Value
dhcp	Triggers 802.1X authentication through DHCP packets.	-
arp	Triggers 802.1X authentication through ARP packets.	-

Views

System view, VLANIF interface view, Ethernet interface view, GE interface view, XGE interface view, 40GE interface view, Eth-Trunk interface view, Port group view

Default Level

2: Configuration level

Usage Guidelines

This command is available to aid upgrade compatibility. It can only be run during the configuration restoration phase of the upgrade.

After the upgrade, this command is no longer supported, and it is replaced by the authentication trigger-condition { dhcp | arp } ^* command in the 802.1X access profile view.