batch-cmd begin

Function

The batch-cmd begin command starts online command script editing.

Format

batch-cmd begin

Parameters

None

Views

Easy-Operation view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

In a batch device deployment scenario, you can run this command to start online command script editing. After editing the commands, press Ctrl+C to exit the editing mode. If you run this command again, the edited commands will be cleared.

Precautions

Only one network administrator is allowed to edit commands online at one time.
If no operation is performed in command editing mode within 30 seconds, you automatically exit from the editing mode to the Easy-Operation view.

Example

# Start online command script editing.

<HUAWEI> system-view
[HUAWEI] easy-operation
[HUAWEI-easyoperation] batch-cmd begin
Info: Begin to edit batch commands. Press CTRL+C to abort this session.
system-view
vlan batch 10 20
ndp enable
ntdp enable                                                                
              
[HUAWEI-easyoperation]