clear topology-error-info

Function

The clear topology-error-info command clears faulty link information from the topology.

Format

clear topology-error-info

Parameters

None

Views

Cluster view

Default Level

2: Configuration level

Usage Guidelines

The clear topology-error-info command can be run only on the Commander switch.

After a faulty client recovers, run this command to clear faulty link information from the topology. To view the topology information, run the display cluster-topology-info command.

Example

# Clear information about faulty links and sub-links.

<HUAWEI> system-view
[HUAWEI] cluster
[HUAWEI-cluster] display cluster-topology-info
The topology information about the cluster:
<-->:normal device         <++>:candidate device         <??>:lost device
-------------------------------------------------------------------------
Total topology node number is 3.
[HUAWEI: Root-00e0-fcb8-d6b6]
|-(GigabitEthernet0/0/2)<??>(GigabitEthernet0/0/1)[0018-8267-7f7d]
|-(GigabitEthernet0/0/3)<-->(GigabitEthernet0/0/3)[00e0-0003-0003]
[HUAWEI-cluster] clear topology-error-info
[HUAWEI-cluster] display cluster-topology-info
The topology information about the cluster:
<-->:normal device         <++>:candidate device         <??>:lost device
-------------------------------------------------------------------------
Total topology node number is 2.
[HUAWEI: Root-00e0-fcb8-d6b6]
|-(GigabitEthernet0/0/3)<-->(GigabitEthernet0/0/3)[00e0-0003-0003]