ble-profile (WLAN view)

Function

The ble-profile command creates a BLE profile or displays the BLE profile view.

The undo ble-profile command deletes a BLE profile.

By default, no BLE profile is created.

Format

ble-profile name profile-name

undo ble-profile { name profile-name | all }

Parameters

Parameter	Description	Value
name profile-name	Specifies the name of a BLE profile, which must be unique and identifies a profile.	The value is a string of 1 to 35 case-insensitive characters. It does not contain question marks (?) or spaces, and cannot start or end with double quotation marks (" ").
all	Deletes all BLE profiles.	-

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can run this command to create or delete a BLE profile or enter the BLE profile view to configure the profile. If the specified profile name does not exist, this command creates a new BLE profile and displays the configuration view of this profile. All parameters in this profile use default values. You can also change values of these parameters.

Follow-up Procedure

After creating a BLE profile, you need to run the ble-profile (AP group view and AP view) command in the AP view or AP group view to bind the profile to make the settings in the profile take effect.

Precautions

A BLE profile bound to an AP or AP group cannot be deleted. To delete a BLE profile, unbind it in the AP view or AP group view.

Example

# Create BLE profile huawei and enter its view.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ble-profile name huawei
[HUAWEI-wlan-ble-prof-huawei]