broadcaster enable

Function

The broadcaster enable command enables the Bluetooth broadcast function of an AP's built-in Bluetooth module.

The undo broadcaster enable command disables the Bluetooth broadcast function of an AP's built-in Bluetooth module.

By default, the Bluetooth broadcast function of an AP's built-in Bluetooth module is disabled.

Only the AP2050DN-E, AP2051DN-E, AP4050DN-E, AP4051TN, AP6052DN, AP7050DE, AP7052DE, AP7052DN, AP4050DE-M, AP4050DE-M-S, AP4050DE-B-S, AP7060DN, AirEngine 5760-10, AP7152DN, AP8050DN, AP8050DN-S, AP8050TN-HD, AP8082DN, AP8150DN, AP8182DN, R250D-E, and R251D-E support the Bluetooth broadcast function.

Format

broadcaster enable

undo broadcaster enable

Parameters

None

Views

BLE profile view

Default Level

2: Configuration level

Usage Guidelines

When an AP's built-in Bluetooth module is used as a BLE device, you can run this command to enable the Bluetooth broadcast function. After this function is enabled, the built-in Bluetooth module sends BLE broadcast frames to surrounding devices. The frame content complies with the iBeacon protocol.

Enabling both the Bluetooth scanning and broadcast functions of an AP affects the efficiency for the AP's Bluetooth module to scan surrounding BLE devices. When an AP does not serve as a Bluetooth base station, it is recommended that the broadcast function of the AP be disabled.

Example

# Enable the Bluetooth broadcast function.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ble-profile name huawei
[HUAWEI-wlan-ble-prof-huawei] broadcaster enable