bpdu-tunnel group-mac (upgrade-compatible command)

Function

The bpdu-tunnel group-mac command enables the switch to replace the multicast destination MAC address of Layer 2 protocol packets with a specified multicast MAC address.

Format

bpdu-tunnel protocol-type group-mac group-mac

Parameters

Parameter	Description	Value
protocol-type	Specifies the type of a Layer 2 protocol.	The value is a string of 1 to 31.
group-mac group-mac	Specifies the multicast MAC address that replaces the destination MAC address of Layer 2 protocol packets.	The value is in H-H-H format. An H is a hexadecimal number of 1 to 4 digits. The value ranges from 0100-0000-0000 to 01ff-ffff-ffff.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

This command is available to aid upgrade compatibility. It can be run when it is entered in full.

After the upgrade, it is replaced by the l2protocol-tunnel protocol-type group-mac group-mac command.