bpdu-tunnel stp group-mac (upgrade-compatible command)

Function

Using the bpdu-tunnel stp group-mac command, you can replace the global well-known MAC address of the STP BPDU packets with a multicast MAC address.

Format

bpdu-tunnel stp group-mac group-mac

Parameters

Parameter	Description	Value
group-mac group-mac	Specifies the multicast MAC address that replaces the well-known global MAC address of the BPDU packets.	The value is in H-H-H format. An H is a hexadecimal number of 1 to 4 digits. The value ranges from 0100-0000-0000 to 01ff-ffff-ffff.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

This command is available to aid upgrade compatibility. It can be run when it is entered in full.

After the upgrade, it is replaced by the l2protocol-tunnel stp group-mac group-mac command.