broadcast-suppression auto-detect (AP system profile view)

Function

The broadcast-suppression auto-detect command configures the rate limit for broadcast packets during intelligent flow control.

The undo broadcast-suppression auto-detect command restores the default rate limit for broadcast packets during intelligent flow control.

By default, the rate limit for broadcast packets is 256 pps.

Format

broadcast-suppression auto-detect packets packets

undo broadcast-suppression auto-detect

Parameters

Parameter	Description	Value
packets packets	Specifies the rate limit for broadcast packets.	The value is an integer that ranges from 64 to 1024, in pps.

Views

AP system profile view

Default Level

2: Configuration level

Usage Guidelines

When there are a large number of broadcast, multicast, and unknown unicast packets, the CPU becomes busy processing these packets. When the traffic rate reaches the rate limit for intelligent traffic control, the device limits the rates of broadcast, multicast, and unknown unicast packets. You can run this command to specify a rate limit as required.

Example

# Set the rate limit for broadcast packets during intelligent flow control to 300 pps.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ap-system-profile name system1
[HUAWEI-wlan-ap-system-prof-system1] broadcast-suppression auto-detect packets 300